Machines are easy to list. Measurement is the hard part.
Below is our machining and inspection base, the design stack behind it, and the quality gates every tool passes before it leaves the plant.
Cut, burn, measure.
All primary operations are in-house. Heat treatment and texture etching are handled by long-term local partners under our specification.
| 5-axis CNC | ±0.01 – 0.02 mm |
|---|---|
| Makino CNC centres | 10 units, ±0.005 – 0.01 mm |
| EDM (Makino / Sodick) | 10 units, mirror & standard |
| Wire EDM | 4 units, ±0.005 mm |
| Deep-hole drilling | Cooling circuits up to 1,000 mm |
| Grinding & polishing | Diamond polish to SPI A-1 |
| Hexagon CMM | 3D dimension report per tool |
|---|---|
| Hardness tester | Steel verification on receipt |
| Roughness tester | Surface finish records |
| Trial press network | 80 – 2,500 T |
| Mould flow software | Moldflow analysis reports |
| Packing | Export crates, VCI film |
The cheapest place to fix a mould
is on screen.
Before a single block is ordered we deliver a DFM opinion: wall thickness, draft, undercuts, gate position, cooling layout and predicted warpage. Most cost problems are visible at this stage — if you are willing to look.
AutoCAD · Pro/E · UG (NX) · SolidWorks · Moldflow
DFM report · 3D mould design · 2D assembly drawing · weekly progress report
Seven gates. Nothing skips.
Each gate has a written check and a named sign-off. If a gate is not passed, the tool does not move — and you are told why, in writing.
Steel from our own backyard.
Zhejiang is one of China's densest mould-steel markets, and we buy directly from a large local mill rather than through traders. That removes a margin layer and, more importantly, weeks of waiting on blocks — which is where most quoted lead times quietly die.
Want the equipment list as a PDF?
Ask and we will send the current machine list, capacity table and a sample document pack from a recent tool.